Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Westchester Homeowners Choose CWS Construction
Westchester Construction Co provides independent CWS construction service in Westchester, FL, handling cabinet installation and refacing, quartz and granite countertops, and full kitchen remodeling for homeowners working with CWS (Cabinet Wholesalers) cabinet lines and stone. What sets our CWS work apart is that we’ve spent years learning how those specific boxes are built, leveled and assembled, so we catch the problems a general remodeler misses. CWS sells through dealer and contractor channels and doesn’t operate its own install crews. That’s why a knowledgeable independent installer matters here.
We are not CWS, and nothing on this page is authorized, sponsored or endorsed by CWS. We’re an independent service provider working with CWS products in Westchester. Our technicians have up to 9 years of experience, and we work across seven service categories, from driveways and pavers to roofing, windows and doors, bathroom remodels and structural additions. One contractor, every trade. Call (888) 334-0815 for a free estimate.
Why Trust Westchester Construction Co for Your CWS Construction?
CWS cabinets are sold as products. Getting them to sit square, close cleanly and stay that way in a Westchester kitchen is a different skill, and we’ve built ours on hundreds of CWS installs across the same handful of product types. That means we know where the assembly steps get skipped, which cabinet lines ship as all-wood plywood boxes versus ready-to-assemble, and how hinge and slide hardware behaves once a full run of doors is hung.
We use quality parts that fit CWS equipment, including OEM door fronts, hinges and drawer slides where they make sense, and quality aftermarket soft-close hardware when factory lead times stretch. Every step is done the warranty-safe way, so you keep whatever coverage came with your purchase. We don’t claim to stock genuine CWS parts or to carry a factory authorization. We’re an independent Westchester contractor who treats your CWS kitchen as a system, not a box of parts to bolt together. You choose the brand; we handle the build.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Fix in Westchester
Most CWS callbacks we see in Westchester trace back to how the cabinet boxes were assembled and leveled, not to the product itself. Here are the five we fix most often.
- Racked RTA boxes. Ready-to-assemble shaker and raised-panel cabines rack out of square when they’re assembled without glue and the right fasteners. Doors stop closing flush, drawer fronts reveal uneven gaps, and the whole run fights you. We pull the affected boxes, re-square them and re-fasten the run as one true plane.
- Swollen particleboard and MDF bases. A supply-line or disposal leak under the sink is brutal on a particleboard or MDF cabinet box. The toe kick and base swell, the edge banding delaminates, and the substrate stays soft in high humidity. We replace the affected base cabinets rather than patch them, because a patch on swollen board doesn’t hold in a Westchester kitchen.
- Hinge and face-frame screws pulling out. Repeated door cycles work hinge screws loose from thin panels. Soft-close doors start to sag and drift out of alignment, and re-tightening the same hole doesn’t last. A proper fix means the right hardware and a clean fastener.
- Countertops set on unlevel cabinets. CWS quartz and granite slabs templated over a cabinet run that wasn’t shimmed to a true plane come back as seam failures and overhang sag. The cabinets have to be corrected first, then the stone re-checked.
- Doors rubbing after assembly. A run installed without glue or level shimming shifts seasonally, and doors that cleared each other in January rub by summer. Re-leveling the full run, not just one cabinet, is what stops the rub.
CWS Parts & Our Repair-vs-Replace Approach
When a CWS cabinet box is sound and only the hardware has failed, we match CWS factory door fronts, hinges and drawer slides with OEM replacement parts where they’re available. If OEM lead times run long, we install quality aftermarket soft-close hinges and slides that fit the same hole patterns. Either way, the goal is to keep the boxes you already own.
When RTA boxes have already swollen or delaminated, the honest advice is to replace the affected base cabinets instead of patching them. Swollen particleboard rarely holds up to Florida humidity, and a patch that fails again costs you more than doing it right. We’ll tell you plainly which path your Westchester kitchen needs. Call (888) 334-0815 to talk it through and get a free estimate.
Our CWS Service Process – Step by Step
- 1
Diagnosis. We start with what you’re seeing: doors that won’t close flush, drawers that drag, a soft toe kick under the sink. We check whether the cabinet boxes are racked, the run is off level, or a leak has already swollen the base.
- 2
Repair or install. We re-square and re-fasten racked boxes, replace swollen base cabinets, and set the full run on a true shimmed plane before any doors go back on. For a new CWS kitchen, we assemble, level and fasten each box with glue, not screws alone.
- 3
Test. Doors close flush, drawers track smooth, hardware cycles clean, and the countertop seams and overhang sit where they should. We check the run as one plane, not cabinet by cabinet.
- 4
Warranty and hand-off. We document what was done, keep the work warranty-safe for your CWS coverage, and leave you clear on which parts are OEM and which are quality aftermarket.
See the difference
Before
After
Before
After
Before
AfterCWS Products We Service & Install in Westchester
We work with the kinds of CWS products most Westchester homeowners are actually buying: CWS all-wood plywood-box assembled cabinet lines sold through their Florida dealer network, CWS ready-to-assemble cabinet lines in shaker and raised-panel door styles, CWS granite and quartz countertop slabs from their stone program, and CWS bath vanity cabinets matched to their kitchen door styles. On the install side, that means cabinet installation and refacing, quartz and granite countertops, backsplashes, kitchen islands, and full kitchen remodeling. A typical CWS kitchen call starts with doors that won’t close flush and drawers that drag, traced to boxes assembled without glue or set on a floor that wasn’t shimmed level. A qualified local pro re-squares the boxes, re-levels the run, rehangs the doors, and re-checks the countertop seams as part of the same fix.
We Also Service These Brands
CWS is one line, and we’re not tied to it. Our crews also install and service KraftMaid cabinetry, Cambria and Silestone engineered stone, and Kohler fixtures, alongside the other brand-name products in our catalog. Whether you’re refreshing a CWS kitchen or working through a multi-trade Westchester remodel, that breadth means you don’t need a second contractor. Our technicians have up to 9 years of experience across those installed products.
FAQs – CWS Construction Service in Westchester
Is Westchester Construction Co affiliated with CWS? No. We are an independent provider and are not affiliated with, authorized by or endorsed by CWS. We simply install and service CWS cabinet and countertop products for Westchester homeowners.
Why are my CWS shaker cabinet doors rubbing against each other? Most likely the boxes racked out of square during assembly or the run was never shimmed level, so the doors drift into each other. We re-square and re-level the run as one plane, which stops the rub. Call (888) 334-0815 for a free estimate.
Can I keep my CWS cabinets and just replace the countertops? Yes, as long as your cabinet boxes are sound and level. We re-level the run first, then template and install your new quartz or granite so the seams and overhang sit right. Call (888) 334-0815 for a free estimate.
What causes CWS cabinet boxes to swell in a Florida kitchen? A supply-line or disposal leak under the sink, combined with Florida’s humidity, swells particleboard and MDF boxes at the toe kick and base. Once swollen, the affected base cabinets usually need replacing. Call (888) 334-0815 for a free estimate.
Do you install CWS quartz and granite countertops on kitchen islands too? Yes. We install CWS stone on islands as well as the main run. Island installation typically runs $3,000 to $10,000, estimated per job and confirmed by the written estimate. Call (888) 334-0815 for a free estimate.
How much does CWS construction cost in Westchester? CWS kitchen work runs from a small remodel at $9,000 to $20,000 up to a full kitchen remodel at $14,000 to $45,000, with cabinet installation at $4,000 to $13,000 and countertop installation at $2,000 to $6,500. These are typical ranges, and the written estimate sets the final price. Call (888) 334-0815 for a free estimate.
| CWS Service | Typical Estimated Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Remodel | $14,000 – $45,000 |
Book Your CWS Service in Westchester, FL
Whether it’s a single racked cabinet run or a full CWS kitchen buildout, Westchester Construction Co brings independent CWS expertise to your Westchester home. Our estimates are free, and you’ll get a written quote before any work starts. Call (888) 334-0815. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Westchester Construction Co.