Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Westchester Homeowners Choose Dvele Construction
Westchester Construction Co provides independent Dvele construction, repair and service in Westchester, FL. We’re not affiliated with or authorized by Dvele: we’re a local construction firm that has spent real field time integrating Dvele’s panelized wall and floor systems into Florida homes, and we stay current with their evolving connection details and finish tolerances. What sets our Dvele work apart in Westchester is climate-specific: we build and repair for subtropical Miami heat, summer rain and hurricane-season wind loads, and we handle the county inspection side too. Our technicians have up to 9 years of experience.
Why does the Westchester angle matter so much for a panelized home? Westchester is a built-out, unincorporated suburb of Miami-Dade with no vacant land left, so construction here is almost entirely rebuilds, additions and tear-downs on mid-century lots. Every Dvele job runs through Miami-Dade County’s post-Surfside 40-year recertification and inspection regime rather than a small-town permit office. Tight lot lines and county inspectors shape the work as much as the panels do. The housing stock is mostly 1950s – 1970s single-family CBS homes on small lots, many with flat or low-slope roofs. When a Dvele build or Dvele renovation lands on one of those lots, the design has to respect setbacks and egress, and old unpermitted neighbor fences or sheds often surface during surveys. Call (888) 334-0815 for a free estimate.
Why Trust Westchester Construction Co for Your Dvele Construction?
Our technicians have up to 9 years of experience, and a good share of that time is panelized work: reading Dvele connection details, setting joints to the tolerances the system calls for, and knowing where these assemblies tend to move. Dvele is a prefab panelized building system, so the parts that matter aren’t just boxes of screws. They’re the specific connectors, sealants and panel accessories that keep wall and floor connections working together. We source Dvele-specific connectors, sealants and panel accessories directly from the manufacturer or approved suppliers so compatibility isn’t a guess, and we use quality aftermarket finishes for visible surfaces. That combination keeps the structure right and the finish work clean.
Warranty-safe practice is part of the deal. We don’t tear into a panel to chase a problem we haven’t diagnosed, and we don’t swap a structural connector for a hardware-store lookalike. Our credibility comes from field work with Dvele builds, not from any manufacturer authorization, and we’ll tell you plainly when a repair touches the structure versus when it’s cosmetic. If it’s the structure, the fix gets documented. We’re an independent Dvele service provider, which also means we can bring other name-brand materials into the same project when the job calls for it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Fix in Westchester
- Panel joint separation at floor-to-wall connections. Thermal expansion in Westchester’s humid climate pushes and pulls at the joints, and months of that movement show up as drywall cracks and air infiltration. Left alone, a hairline crack widens and the wall starts to feel drafty near the floor.
- Moisture intrusion at window and door penetrations. Factory-applied sealants break down under intense sun and heavy rain. That’s the classic hidden leak: the window looks fine from inside until the framing behind the flashing is already wet. Re-flashing and resealing with UV-resistant sealants is the durable fix.
- Finish cracks along panel seams in kitchens and bathrooms. Seasonal humidity swings work on seams, especially around tiled areas, where a rigid finish meets a panel that breathes and moves. The crack is a symptom. The real issue is how the seam was detailed in the first place.
- Mechanical chase misalignment. Dvele walls have pre-routed cavities for plumbing and electrical. Retrofit a fixture, move a drain, or add a circuit, and the chase has to line up. When it doesn’t, a simple fixture swap turns into a service disruption that runs through the wall.
- Stucco and seam transitions on exterior walls. Miami’s sun and rain attack the transition where panelized walls meet stucco or roof detailing. Wind-load requirements under the Florida Building Code make those transitions structural concerns, not just cosmetic ones.
Dvele Parts & Our Repair-vs-Replace Approach
We choose quality parts that fit Dvele equipment, full stop. Dvele-specific connectors, sealants and panel accessories come from the manufacturer or approved suppliers so the tolerances hold. Visible surfaces can take high-quality aftermarket finishes without touching the structural logic underneath. We don’t claim to stock OEM or genuine Dvele parts, and we aren’t a Dvele dealer; we’re an independent shop that knows what these assemblies need.
Repair versus replace comes down to two questions: is the structural integrity intact, and does replacement cost more than it’s worth in long-term performance? A separated joint or a degraded seal is a repair. A panel with compromised core or damaged structural framing usually isn’t. We assess it, explain it in plain terms, and put the recommendation in a written estimate. Call (888) 334-0815 to schedule a free estimate.
| Dvele Service in Westchester | Typical Estimated Cost |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Roof Repair | $400 – $1,800 |
These are typical estimated ranges. The written estimate, based on your actual project, sets the final price.
Our Dvele Service Process – Step by Step
- 1
Diagnosis. We inspect the panel joints, penetrations and mechanical chases, then separate movement issues from moisture issues. Westchester humidity means we’re looking for both, and we check the county recertification and inspection status on structural work before we open anything up.
- 2
Repair or install. Loose material comes out, Dvele-approved fasteners reinforce the connections, flexible sealant goes in where joints need to move, and re-flashing handles any window or door penetration.
- 3
Test. We check air infiltration at the joints, confirm plumbing and electrical in the chases function, and verify finishes sit flush along the seams before we close up.
- 4
Warranty and documentation. Structural work gets documented so it’s clear what was repaired and how, which matters both for your records and for the next inspection cycle.
A common Dvele issue in Westchester is panel joint separation at floor-to-wall connections, causing cracks in drywall and drafts. A qualified local pro typically inspects the joints, removes loose material, applies flexible sealant, and reinforces connections with Dvele-approved fasteners to accommodate movement. Around windows, the fix means re-flashing and resealing penetrations with UV-resistant sealants.
See the difference
Before
After
Before
After
Before
AfterDvele Products We Service & Install in Westchester
We work across the Dvele line as it’s built: the Core Series, the Signature Series, the Custom Series and the ADU Series. That range covers full kitchen remodeling, full bathroom remodeling and roof repair on Dvele homes, plus structural additions and accessory dwelling units where the panelized system meets an existing mid-century CBS structure. We don’t claim to stock any of it; we assess what’s there and source what the job needs. Impact-rated openings and flat or low-slope roof detailing come up often on Westchester Dvele work because the Florida Building Code and hurricane season make both non-negotiable. We service and install these systems as an independent provider, not as a dealer.
We Also Service These Brands
Dvele is one system among many we handle. The same Westchester crews work with KraftMaid cabinetry, Cambria and Silestone engineered stone, and Kohler plumbing fixtures, and those integrate cleanly with Dvele wall systems when you want a specific look in the kitchen or bath. One contractor across the trades means the material choice stays yours, whether it’s a Dvele panel system or a name-brand countertop.
FAQs – Dvele Construction Service in Westchester
No. We’re an independent construction firm, not a Dvele dealer and not affiliated with or authorized by Dvele. We work on Dvele systems based on field experience with panelized builds, and we say so plainly. Call (888) 334-0815 for a free estimate.
Yes. We source Dvele-specific connectors, sealants and panel accessories from the manufacturer or approved suppliers for compatibility, and use high-quality aftermarket finishes for visible surfaces where that makes sense. We don’t claim to stock OEM or genuine Dvele parts.
It depends on scope. A joint repair or reseal is a short job; a full kitchen or bathroom remodel on a Dvele home runs weeks. We answer 24/7, dispatch from 7am to 7pm Sunday through Friday, and set a timeline in the written estimate before work starts. Call (888) 334-0815.
Our Dvele coverage spans the Core, Signature, Custom and ADU Series, from full kitchen and bathroom remodeling to roof repair and panel-level structural work. That includes interior and exterior trades in one project. Call (888) 334-0815 for a free estimate.
Usually yes, within limits. Layout changes that move fixtures through the pre-routed chases are workable; changes that cut structural panels aren’t, so we verify what’s load-bearing first. Westchester homes on tight lots make that check more important, not less. Call (888) 334-0815 for a free estimate.
We separate the source from the symptom. That means verifying the shower pan and wall penetrations, re-flashing and resealing with UV-resistant sealants, and addressing seam movement around tiled areas with a detail that flexes. Westchester’s humidity makes the seam detail as critical as the waterproofing. Call (888) 334-0815 for a free estimate.
Typical estimates for roof repair in Westchester run $400 – $1,800, depending on the extent of storm and impact damage. Wind and rain are the usual culprits this far into hurricane season. The written estimate sets the final price. Call (888) 334-0815 for an exact quote – estimates are free.
Yes, when the shower is planned around the panel layout rather than cut into it. Walk-in shower installation on a Dvele home means confirming the plumbing chase, waterproofing the transition, and detailing the seam so it can move with humidity swings. Call (888) 334-0815 for a free estimate.
Panel joints can show cracking where thermal expansion and humidity work at the floor-to-wall connections. The repair is methodical: inspect, remove loose material, apply flexible sealant, and reinforce with Dvele-approved fasteners. Call (888) 334-0815 for a free estimate.
Not when the repair uses compatible connectors and sealants and doesn’t alter structural panels without documentation. We work warranty-safe by design, though we can’t speak for Dvele’s terms. Ask us to document the scope so the record is clear. Call (888) 334-0815 for a free estimate.
Typical estimates are $14,000 – $45,000 for a kitchen remodel, $9,000 – $28,000 for a bathroom remodel, and $400 – $1,800 for roof repair. Final pricing depends on scope, and the written estimate sets it. Call (888) 334-0815 for an exact quote – estimates are free.
Book Your Dvele Service in Westchester, FL
Whether it’s a separated panel joint, moisture around a window, or a full kitchen or bathroom remodel on a Dvele home, we’ll give you a straight assessment and a written estimate. Call (888) 334-0815. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Dvele work in Westchester starts with a free estimate.
Written by the team at Westchester Construction Co.