Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Westchester Homeowners Choose Belgard Construction
Westchester Construction Co provides independent Belgard construction service in Westchester, FL. We install and repair Belgard paver driveways, paver patios, and Belgard wall systems, and we handle the base, drainage, and detailing that decide whether those surfaces hold up through Miami’s rainy season. We are an independent contractor working with Belgard products, not a dealer and not authorized or endorsed by Belgard. Our technicians have up to 9 years of experience, and our credibility comes from job-site familiarity with how these pavers and wall systems age in Westchester conditions.
That matters here. Westchester and the surrounding neighborhoods see intense sun, heavy summer rain, high humidity, and hurricane season from June through November, all pushing on hardscape that was built on some of the tightest lots in Miami-Dade. Call (888) 334-0815 to schedule a free estimate.
Why Trust Westchester Construction Co for Your Belgard Construction?
Belgard pavers are not a hard product to lay badly. They’re a hard product to lay correctly, and the difference shows up two rainy seasons later. Our technicians have worked with Belgard pavers and wall systems often enough to know how Mega-Arbel, Catalina Grana, Urbana, and Weston Stone behave in a subtropical market: how the paver body takes on and releases moisture, where joint sand migrates first, and which base and drainage details are the ones that fail when they’re skipped.
We use quality parts that fit the work: edge restraint that actually holds, gravel and filter fabric behind wall faces, weep drainage where it belongs, and polymeric sand applied at the right moisture and compacted properly. Service and repair on a Belgard surface won’t void a warranty on its own when the work follows the manufacturer’s installation guidance and the paver series, color run, and thickness stay consistent. Where a section is already failing, we tell you what we see and what the realistic fix costs before anything gets pulled. You choose the surface and the finish. We handle the build.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Fix in Westchester
Most Belgard complaints come down to water, base, or restraint. The paver is rarely the problem. Here are the five failures we see most across Westchester projects.
- Efflorescence bloom on Mega-Arbel and Catalina Grana pavers. A whitish haze rises out of the paver body as moisture migrates through the concrete and carries mineral salts to the surface. It’s common in humid markets and tends to show up in patches after a wet stretch, not evenly across the field. It’s a moisture-and-drainage signal, not damage to the paver.
- Polymeric sand loss and joint erosion. Heavy summer rain washes joints out on Belgard paver driveways and patios when the sand wasn’t installed at the right moisture, compacted enough, or refreshed after settling. Once joints open, weeds move in and pavers start to shift.
- Settlement and lippage at patio edges. Edges drop when the base was compacted thin or the edge restraint was omitted or undersized. It’s most visible on large-format Mega-Arbel installs where a small dip creates an obvious lip you catch with a foot.
- Wall block movement and cap separation on Urbana and Weston Stone. Leaning caps and bulging faces usually trace back to skipped gravel backfill and missing weep holes. Water builds up behind the wall, freezes the pressure in place, and the face pushes out.
- Heaved or rocking sections over tree roots and old slabs. On Westchester’s mid-century lots, driveways and patios are often laid over the remains of an older slab or near mature root systems. Roots lift, small cracks run, and a few pavers rock while the rest of the field is sound.
A Belgard paver patio or driveway usually shows its first problem as joint sand washing out and a few pavers rocking or dropping slightly along an edge. The typical cause is a thin, poorly compacted base or missing edge restraint rather than a bad paver, and the usual fix is to lift the affected course, re-establish and compact the base, reset the pavers, re-install edge restraint, and re-sand the joints with polymeric sand. On retaining walls, the pattern is often a leaning cap or bulging face where gravel backfill and weep drainage were never installed.
Belgard Parts & Our Repair-vs-Replace Approach
The choice between repair and replacement comes down to how much of the field is actually failing. If a section has settled, lost joint sand, or lost restraint, honest repair – lift and reset the base, re-sand, re-compact – is usually cheaper and better than replacing an entire field that’s otherwise sound. If pavers are spalling, crumbling at the face, or the color has worn through, replacement is the answer.
When we do replace, the replacement pavers need to match the original Belgard series and color run so the blend stays consistent across the repaired area. Generic aftermarket pavers of similar size rarely match thickness or color lot, and a mismatched course reads as a patch from the street. We don’t claim to stock OEM or genuine Belgard parts, and we aren’t a Belgard dealer. We source quality pavers that fit the installed series and confirm the color match before anything is ordered.
Call (888) 334-0815 for a free estimate. We’ll look at the base, the joints, and the drainage before recommending either path.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We walk the surface, sound out rocking pavers, read the joint sand, check edge restraint, and probe the base where a section has settled. On walls, we look for weep hole staining and cap movement, since those two together usually point to backfill and drainage rather than the block itself.
- 2
Repair or install. For repair, we lift the affected course, re-establish and compact the base, reset the pavers, reinstall edge restraint, and re-sand joints with polymeric sand. For new work, we excavate to the right depth, compact in lifts, set the base and edge, then lay, cut, and compact the field.
- 3
Test. We check slope away from the house and toward drainage points, confirm joints are uniformly filled, and verify no paver rocks. On walls, we confirm water can actually escape the backfill.
- 4
Warranty and aftercare. We leave you with clear notes on what the surface needs and how often to re-sand joints and reseal. Warranty on our workmanship is handled per the written estimate, and Belgard’s own product warranty stays with you as the owner.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Westchester
Belgard makes interlocking concrete pavers, wall blocks, and veneer stone for driveways, patios, walkways, and retaining walls. On Westchester properties, the work we take on most often is paver patio installation, paver driveway installation, and driveway sealing, along with repair and re-sand on existing fields.
Paver patios here usually need to be the outdoor living floor for a house whose lot is already packed with the home, a fence, and a garage. Paver driveways need to survive Miami sun and summer rain without joint erosion and hold up at the apron and along tight property lines. Sealing protects the color and slows moisture, but it doesn’t fix a base problem. We handle all of it, and we tell you which of the three you actually need.
We Also Service These Brands
Belgard work is a big part of what we do, but Westchester Construction Co handles the whole home. That includes cabinetry from KraftMaid, engineered stone from Cambria and Silestone, and fixtures from Kohler, along with roofing, fencing, windows, additions, and ADUs. If your Belgard patio is part of a bigger project, one contractor can carry it from the driveway to the kitchen.
FAQs – Belgard Construction Service in Westchester
No. Westchester Construction Co is an independent contractor that works with Belgard pavers and wall systems, not a dealer, and we are not authorized, endorsed, or partnered with Belgard. Our Belgard knowledge comes from installing and repairing these products, not from a manufacturer badge.
Often, yes, when the original series and color run are still in production and the installed thickness is identified. Matching color lot is the tricky part. We won’t substitute generic pavers of similar size, because they rarely match thickness or color, and a mismatched course reads as a patch. Call (888) 334-0815 for a free estimate and we’ll tell you what can match and what can’t.
Because the joints were likely never fully filled or the sand isn’t locking the way polymeric sand does when it’s installed at the right moisture and compacted. Westchester gets heavy summer rain, and every cycle that drains through a shallow joint pulls a little more sand out. Once joints clear, pavers rock and weeds take hold. Re-sanding correctly, with the right product and compaction, fixes the recurring cycle.
No. Efflorescence is mineral salt drawn to the surface as moisture moves through the paver body, and it’s common in humid markets like Westchester, particularly on Mega-Arbel and Catalina Grana. It’s a moisture signal, not structural damage. If it keeps reappearing, the underlying drainage or grade is worth a look.
If the face is bulging, the blocks are stepping out, or the cap is separating and leans, the problem is behind the wall. That’s drainage and backfill, not the cap. Slapping a new cap on a wall that’s already moving doesn’t fix it, and it usually makes the next repair bigger. Call (888) 334-0815 to have someone look at the wall face and the drainage.
Sealing helps. It slows moisture intrusion, protects color from Miami sun, and reduces the chance of a fresh efflorescence bloom. What sealing does not do is fix a thin base, missing edge restraint, or a settled section. Those have to be repaired first or the sealer just holds the problem in place.
Belgard work is priced per job by written estimate, but typical estimated ranges for Westchester are shown below. These are estimates, and the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Sealing | $250 – $700 |
| Driveway Replacement | $5,000 – $14,000 |
Call (888) 334-0815 for an exact quote. Estimates are free.
Book Your Belgard Service in Westchester, FL
If your Belgard patio, driveway, or wall system is showing joint erosion, settled edges, a hazy bloom, or a leaning cap, call Westchester Construction Co at (888) 334-0815. We’ll walk the surface, tell you what’s actually failing, and give you a written estimate. Free estimates, one contractor, every trade. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Westchester Construction Co.