CGI Construction Service in Westchester, FL

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel
Get your free estimate
Questions about your construction?Free estimate, price agreed before work starts
Call (888) 334-0815

Why Westchester Homeowners Choose CGI Construction

We provide independent CGI construction service in Westchester, Florida, installing and repairing CGI’s all-wood and plywood-box cabinetry, Shaker and slab-front door styles, soft-close hardware and semi-custom vanity and pantry lines. What makes our CGI work different is that we fit the product to your room and your budget rather than to a dealer program, and we tell you honestly when a failing box should be replaced instead of patched.

Call (888) 334-0815

Westchester is a built-out, unincorporated suburb of Miami-Dade with no vacant land left. Construction here is almost entirely rebuilds, additions and tear-downs on mid-century lots, and every CGI cabinet job runs through Miami-Dade County’s post-Surfside 40-year recertification and inspection regime rather than a small-town permit office. The work is shaped as much by tight lot lines and county inspectors as by the actual building.

To be clear about who we are: Westchester Construction Co is an independent CGI service provider. We’re not affiliated with, authorized by, or a dealer for CGI. Call (888) 334-0815. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Trust Westchester Construction Co for Your CGI Construction?

Our technicians have up to 9 years of experience, and a good share of that time has been spent inside CGI cabinets rather than reading spec sheets about them. We know how the all-plywood box goes together, how the Shaker and slab fronts behave over a few humid summers, and which hardware sets keep the soft-close feel the line is bought for.

Parts matter here. We use CGI hinges, glides and touch-up and finish kits where they exist, so the soft-close action and the finish match the rest of the run. When a part is discontinued, we go to quality aftermarket hardware that fits the box correctly rather than forcing something close enough. That approach keeps the installation warranty-safe: nothing we hang, shim or adjust should give a manufacturer a reason to deny a claim on hardware you already own.

We’re a full-scope residential construction company, not a cabinetry-only shop. That means a CGI kitchen can sit inside a larger project – new impact windows, a roof, a bathroom rebuild – without you coordinating three separate contractors. One contractor, every trade.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common CGI Construction Problems We Fix in Westchester

CGI cabinets fail in predictable ways here. The subtropical Miami climate – intense sun, heavy summer rains, high humidity, hurricane season from June through November – is hard on any cabinet line, and the failure patterns below are what we see most often in Westchester homes.

  • Thermofoil and laminate faces peeling at the edges. The door face lifts where moisture wicks into the edge band, usually at the bottom of upper cabinets and around the sink. Air-conditioned interiors with high ambient humidity accelerate it. Once the substrate under the face is exposed, patching rarely holds.
  • Soft-close glides losing dampening or sagging. This usually isn’t hardware failure. Cabinets shimmed out of level on an uneven slab floor put the drawer box in a bind, and the glide wears unevenly through its travel. The fix is re-leveling and re-adjusting before replacing anything.
  • Swollen boxes at sink bases and dishwasher bays. Particleboard and MDF cores swell when a slow leak goes unnoticed behind a cabinet. A soft, crumbly bottom panel or a door that no longer closes flush is the tell. This is the one failure where replacement is usually the honest answer.
  • Painted and stained finishes checking and fading near west-facing windows and sliders. Afternoon sun through a slider does more damage to a cabinet finish than most homeowners expect. The finish dries, checks and loses color on the sun-facing run while the rest of the kitchen looks fine.
  • Doors and drawers out of alignment after a floor or countertop change. New flooring or a new counter changes the plane the cabinets sit on. Hinges and glides need a full re-adjustment through their travel, not a quick tweak.
Want to talk it through?Free estimate, price agreed before work starts
Call (888) 334-0815

CGI Parts & Our Repair-vs-Replace Approach

We don’t stock, carry or order genuine CGI parts, and we’re not a CGI dealer. What we do is source quality parts that fit CGI equipment: CGI hinges, glides and finish kits where they’re available, and quality aftermarket hardware when an OEM part has been discontinued. The goal is a soft-close action and finish that match the rest of the run.

Repair versus replace comes down to the substrate. A loose hinge, a drifted glide or a scratched door face is a repair. A swollen box, a soft bottom panel or a run of faces peeling off exposed core is not – refacing or replacing those cabinets is more honest than patching a failing substrate, and we’ll tell you so.

If you’re weighing the two, call (888) 334-0815. Estimates are free, and the written estimate sets the final price.

Our CGI Service Process – Step by Step

  1. 1
    Diagnosis. We open every affected cabinet, check box cores for swelling, test each soft-close glide and hinge through its full travel, and look at the floor plane under the run. On older Westchester homes we also note whether the cabinets sit level on the slab or were shimmed to compensate.
  2. 2
    Repair or install. For repairs, we pull the affected doors, replace damaged faces or cabinets, and re-level the boxes. For new installations, we set and shim the CGI cabinets to the floor and wall plane, then hang doors and drawers with the hardware adjusted to the room, not to the factory setting.
  3. 3
    Test. Every drawer and door gets cycled through its full travel. We check soft-close catch, door reveal alignment and that no cabinet binds against a counter, appliance or adjacent run.
  4. 4
    Warranty. You get a written record of what was replaced, what was adjusted and which parts were used, so any manufacturer warranty claim on the cabinets stays clean and documented.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Need a price for your construction?Free estimate, price agreed before work starts
Call (888) 334-0815

CGI Products We Service & Install in Westchester

We service and install the CGI product types that show up in Westchester kitchens and baths: all-wood and plywood-box base and wall cabinets, Shaker and slab-front door styles in painted or thermofoil finishes, soft-close drawer and door hardware sets, and the semi-custom vanity and pantry cabinet lines. That covers a straightforward cabinet swap, a refacing job and a full kitchen buildout. We don’t claim to stock any of it. What we bring is the fitting, leveling and hardware adjustment that decides whether a CGI cabinet run still feels right after five humid summers.

We Also Service These Brands

CGI is one line among many we work with. We also handle KraftMaid cabinetry, Cambria and Silestone engineered stone surfaces, and Kohler fixtures, which matters when a CGI kitchen also needs a countertop or a sink and faucet replaced. You choose the brand; we handle the build. That keeps you from hiring a separate contractor for every material in the room.

FAQs – CGI Construction Service in Westchester

Service Typical Estimated Range
Cabinet Installation $4,000 – $13,000
Countertop Installation $2,000 – $6,500
Kitchen Remodel $14,000 – $45,000
Small Kitchen Remodel $9,000 – $20,000
Backsplash Installation $800 – $2,500

One pattern worth knowing before a pro walks in: CGI thermofoil faces curling at the bottom edges while a couple of soft-close drawers stop catching. The usual cause is moisture wicking into the door edges, combined with glides that were never adjusted after the boxes were shimmed onto an uneven floor. A qualified local pro pulls the affected doors, checks the box cores for swelling, replaces the damaged faces or cabinets, and re-levels and re-adjusts the hardware through its full travel before reinstalling.

Book Your CGI Service in Westchester, FL

Whether it’s a peeling CGI door face, a drawer that won’t catch, or a full CGI cabinet installation in a Westchester kitchen, we’ll give you a straight read on repair versus replace. Call (888) 334-0815 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Written by the team at Westchester Construction Co.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 334-0815
Local Service Coverage
Driveway & Pavers WestchesterDriveway & Pavers Westwood LakesDriveway & Pavers SweetwaterDriveway & Pavers TamiamiDriveway & Pavers Kendale LakesDriveway & Pavers DoralDriveway & Pavers KendallDriveway & Pavers The CrossingsDriveway & Pavers Kendall WestDriveway & Pavers Three LakesDriveway & Pavers Richmond HeightsDriveway & Pavers The HammocksDriveway & Pavers Palmetto EstatesDriveway & Pavers Country WalkDriveway & Pavers West PerrineFence Installation WestchesterFence Installation Westwood LakesFence Installation SweetwaterFence Installation TamiamiFence Installation Kendale LakesFence Installation DoralFence Installation KendallFence Installation The CrossingsFence Installation Kendall WestFence Installation Three LakesFence Installation Richmond HeightsFence Installation The HammocksFence Installation Palmetto EstatesFence Installation Country WalkFence Installation West PerrineHome Additions & ADU WestchesterHome Additions & ADU Westwood LakesHome Additions & ADU SweetwaterHome Additions & ADU TamiamiHome Additions & ADU Kendale LakesHome Additions & ADU DoralHome Additions & ADU KendallHome Additions & ADU The CrossingsHome Additions & ADU Kendall WestHome Additions & ADU Three LakesHome Additions & ADU Richmond HeightsHome Additions & ADU The HammocksHome Additions & ADU Palmetto EstatesHome Additions & ADU Country WalkHome Additions & ADU West PerrineBathroom Remodeling WestchesterBathroom Remodeling Westwood LakesBathroom Remodeling SweetwaterBathroom Remodeling TamiamiBathroom Remodeling Kendale LakesBathroom Remodeling DoralBathroom Remodeling KendallBathroom Remodeling The CrossingsBathroom Remodeling Kendall WestBathroom Remodeling Three LakesBathroom Remodeling Richmond HeightsBathroom Remodeling The HammocksBathroom Remodeling Palmetto EstatesBathroom Remodeling Country WalkBathroom Remodeling West PerrineKitchen Remodeling WestchesterKitchen Remodeling Westwood LakesKitchen Remodeling SweetwaterKitchen Remodeling TamiamiKitchen Remodeling Kendale LakesKitchen Remodeling DoralKitchen Remodeling KendallKitchen Remodeling The CrossingsKitchen Remodeling Kendall WestKitchen Remodeling Three LakesKitchen Remodeling Richmond HeightsKitchen Remodeling The HammocksKitchen Remodeling Palmetto EstatesKitchen Remodeling Country WalkKitchen Remodeling West Perrine

Request a Free Estimate in Westchester

Tell us what you need - Westchester Construction Co responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7