Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Westchester Homeowners Choose Delta Construction
Westchester Construction Co provides independent Delta construction, installation and repair service in Westchester, FL. What makes our Delta work different is repetition: our technicians have up to 9 years of experience rebuilding the same Delta valve cartridges, shower trims and tub spouts across Westchester’s 1950s to 1970s CBS homes, so the diagnosis is fast and the repair is the right one. We are an independent Delta service provider. We are not affiliated with, authorized by or certified by Delta, and we don’t claim to be a Delta dealer.
Delta fixtures show up in a large share of the bathrooms and kitchens we open in Westchester, and that familiarity matters when a shower valve stops holding temperature or a kitchen faucet starts dripping. Call (888) 334-0815 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- We service and install Delta kitchen and bath fixtures as an independent provider, not a factory-authorized one.
- Pressure-balance cartridges get genuine Delta replacement parts; cheap imitations cause repeat leaks.
- Most Delta shower valve complaints in Westchester trace to scale and mineral buildup, not a failed valve body.
- Delta fixture work fits cleanly into a full bathroom or small kitchen remodel handled by one contractor.
Why Trust Westchester Construction Co for Your Delta Construction?
Our technicians have taken apart and put back together enough Delta Monitor 13/14 Series valves, Foundations single-handle faucets, Addison and Cassidy bath fixtures and In2ition showerheads to know how each one ages in a Westchester bathroom. That’s the trust we can actually back up. Not a plaque on a wall. Familiarity with the product.
We buy quality parts that fit Delta equipment: genuine Delta OEM cartridges, seats, springs and trim when the valve body is still sound. For cosmetic trim, a quality aftermarket piece is fine. For pressure-balance cartridges, we don’t substitute, because a cheap imitation is the most common cause of a shower valve that leaks again within months.
Warranty-safe work matters here. Delta’s finish and function warranties depend on correct installation and the right parts, so we keep the existing valve body when it’s sound rather than selling a new one, and we replace what’s corroded through rather than rebuild it twice. Westchester’s high humidity is hard on finishes, and Florida Building Code requirements shape how a shower or kitchen rebuild has to be put back together. We work within both.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Delta Construction Problems We Fix in Westchester
South Florida water carries enough mineral content that the internal parts of a Delta valve wear on a predictable schedule. Here’s what we find most often in Westchester.
- Monitor 13/14 Series pressure-balance cartridge scaling and seizing. Hard water builds scale on the cartridge piston, so the valve loses temperature control or the handle stiffens until it won’t turn at all. The valve body is usually fine. The cartridge is the problem.
- Dripping or stiff Delta Foundations single-handle faucets. Wear shows up in the seats, springs and cam assembly inside the faucet body long before the body itself fails. A faucet that drips after a cartridge swap often had the wrong seat kit or a worn cam left in place.
- Finished trim and spot-shield finishes pitting or flaking. A humid Westchester bathroom with poor ventilation accelerates finish breakdown on shower trims and spouts. Once the finish pits through, the trim is cosmetic history, though the valve behind it may be fine.
- Diverter spouts and In2ition hand-shower flow restrictors clogging. Mineral buildup narrows the diverter and the restrictor until water barely reaches the fixed head. Homeowners often assume the valve failed when it’s a clogged passage upstream.
- Tub spout and trim removal that damages tile. Old spouts set with corrosion and old sealant come off badly in untrained hands, and a careless pull cracks tile on a mid-century tub surround. We isolate, cut carefully and protect the surround.
One more Westchester reality: because the suburb is fully built out, an open-wall bathroom remodel often reveals plumbing and framing that county inspectors will look at under Miami-Dade’s post-Surfside recertification regime. Handling the Delta fixture work correctly the first time keeps that inspection clean.
Delta Parts & Our Repair-vs-Replace Approach
We use genuine Delta OEM cartridges, seats, springs and trim where the valve body is sound. That’s the default because it’s the right call: a pressure-balance cartridge is a safety part, and a cheap imitation is a repeat leak waiting to happen. For purely cosmetic trim, quality aftermarket is acceptable and sometimes the smarter buy. We don’t stock or carry OEM Delta parts, and we aren’t a Delta dealer. We source the quality parts that fit your fixture.
Repair versus replace comes down to the body. A scale-fouled cartridge in a sound Monitor valve gets a cartridge. A valve body that’s cracked, or a faucet body corroded through, gets replaced. That sounds more expensive on the day, and it usually isn’t over ten years, because a third repair on a failing body costs more than one honest replacement.
A typical Delta Monitor 13/14 shower valve that has slowly lost temperature control or developed a stiff handle usually has a scale-fouled pressure-balance cartridge, not a failed valve body. A qualified local pro isolates the water, pulls the cartridge with the correct removal tool, flushes the body, and installs a genuine Delta replacement cartridge and seats before testing hot/cold balance. When the same call involves a corroded diverter spout or a clogged In2ition hand-shower, the trim and flow restrictor are handled at the same visit so the shower doesn’t come apart twice. Call (888) 334-0815 for a free estimate on your Delta repair.
Our Delta Service Process – Step by Step
- 1
Diagnosis. We isolate what’s actually failing: cartridge versus valve body on a Monitor 13/14, seat and cam versus cartridge on a Foundations faucet, flow restrictor versus diverter on an In2ition. This step decides the whole job.
- 2
Repair or install. Correct removal tool, water isolated, body flushed. Genuine Delta cartridge and seats go back in where the body is sound. Cosmetic trim is matched to the finish already in the bathroom.
- 3
Test. Hot/cold balance, handle travel, drip check at the spout, and flow test at both heads on an In2ition. We don’t call a valve fixed on a two-second handle turn.
- 4
Warranty-safe close-out. Documentation of the parts used and the work performed, so your Delta warranty claim is supported if you ever need one. Any permit work goes through Miami-Dade County inspection as required.
See the difference
Before
After
Before
After
Before
AfterDelta Products We Service & Install in Westchester
We service and install Delta Monitor 13/14 Series tub-and-shower valves, Foundations single-handle kitchen and lavatory faucets, the Addison and Cassidy bath fixture collections, and In2ition two-in-one showerheads. That covers cartridge and seat replacement, trim and finish work, diverter spout service, and full fixture installation inside a remodel. We don’t carry stock, so we’re not selling you what’s on a shelf. We’re installing what fits your project, with quality parts and correct technique. Bathroom and small kitchen remodels are where most of this work lands.
We Also Service These Brands
We’re not a single-brand shop. Alongside Delta, our work spans KraftMaid cabinetry, Cambria and Silestone engineered stone surfaces, and Kohler fixtures, among a broader roster of name-brand product lines. That matters on a project touching more than one room or more than one trade: you choose the brand, we handle the build, and you’re not coordinating three contractors to get a bathroom and a kitchen done.
FAQs – Delta Construction Service in Westchester
No. We are an independent Delta service provider. We are not affiliated with, authorized by, certified by or a dealer for Delta. Our expertise comes from repeated work on the actual product in Westchester homes, not from factory authorization.
Yes, in most cases. The pressure-balance cartridge sits behind the trim plate and can be pulled with the correct removal tool once the water is isolated, so the wall stays intact. A cracked valve body is the exception.
Because the seats, springs and cam assembly in the faucet body weren’t replaced with it. A new cartridge against worn seats drips again quickly. The whole rebuild kit is what stops it.
Keep it if the body and finish are sound. Mineral buildup in the flow restrictor is the usual complaint, and that’s a cleaning or restrictor swap, not a reason to replace a working fixture.
It depends on whether the valve body is sound. A cartridge and trim refresh adds less than a full valve body replacement, which requires opening the wall. Typical estimated ranges for the surrounding work: Walk-In Shower Installation $4,500 – $12,000, Tub-to-Shower Conversion $3,500 – $10,000, Full Bathroom Remodel $9,000 – $28,000. The written estimate sets the final price. Call (888) 334-0815 for an exact quote; estimates are free.
Delta fixture work is priced per job by the written estimate, and the ranges below are typical estimates for Westchester:
| Service | Typical Estimated Range |
|---|---|
| Full Bathroom Remodeling | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Backsplash Installation | $800 – $2,500 |
Call (888) 334-0815 for an exact quote. Estimates are free, and the written estimate sets the price.
Often yes, if the finish is intact and the spout isn’t corroded through. A tub-to-shower conversion usually keeps the valve body and swaps the trim and showerhead, which keeps cost down. If the finish has pitted, replacing trim at the same visit makes more sense than a second trip later. Call (888) 334-0815 for a free estimate on your conversion.
Book Your Delta Service in Westchester, FL
Whether it’s a stiff Monitor 13/14 handle, a dripping Foundations faucet, or a full bathroom or small kitchen remodel built around Delta fixtures, we’ll give you a written line-item estimate before any work starts. Call (888) 334-0815. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Westchester Construction Co.