Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Windows & Doors for Westchester Homeowners
Windows and doors do quiet work until they stop doing it. A sliding door that drags, glass that fogs between the panes, a front door that no longer seals against the frame: each one shows up on your power bill or your comfort level before it shows up on a repair list. In Westchester, where afternoon sun and summer storms both press on the same walls, the right window and door package matters more than the label on the glass.
Westchester Construction Co handles window and door projects as part of a larger residential construction practice, so a door replacement doesn’t sit in limbo while you chase a separate installer. Our technicians have up to 9 years of experience with installation, replacement, and impact-rated systems, and we work with brands homeowners already recognize. Call (888) 334-0815 and we’ll set up a free estimate. We answer 24/7.
What Our Windows & Doors Service Includes
Window and door work covers a wide range: a single pane swap, a full-house impact upgrade, a patio slider that has to move a whole wall opening. Here’s how we break it down.
Window Installation
Window installation means fitting a new unit into a wall opening, whether that’s new construction, a replacement of an old aluminum frame, or a conversion to impact-rated glass. You need it when a window is being added, when an addition opens a new wall, or when the existing frame has lost its shape. We measure the rough opening, check the flashing and sill detail, and set the unit so it drains the way it should. On additions and structural work, windows go in as part of the larger build, not as an afterthought bolted onto a finished wall.
Door Installation
Door installation covers entry doors, interior doors, and the frames that hold them. It matters when a door is new, when an old one has warped past adjustment, or when you want a different material or finish at an entrance. We set the frame plumb, hang the door with even margins, and check the hardware so the latch catches the way it should on the first try. Therma-Tru entry systems are one option we work with when a homeowner wants a fiberglass or steel door with a finished look.
Window Replacement
Window replacement is a swap of the glass and frame while the opening stays where it is. It’s the right call when frames are sound but the glass has failed, when seals have broken and condensation sits between panes, or when you want to move up to impact-rated units without changing the wall. We pull the old unit, inspect the surrounding structure for water damage, and install the new one with a fresh seal. If the frame itself has rotted, we tell you that before we start, because patching around bad wood just moves the problem.
Impact Windows & Doors
Impact windows and doors use laminated glass and reinforced frames built to resist storm-driven debris. They’re the standard choice for homeowners who want protection without shutters, and for anyone whose code requirements call for impact-rated assemblies. We work with PGT, CGI, and ECO Window Systems on impact-rated products, matching the unit to the opening and the local requirements. The hardware, anchoring, and flashing matter as much as the glass, so we treat the whole assembly as one system.
Energy-Efficient Windows
Energy-efficient windows use improved glass packages, better spacers, and tighter frames to reduce heat gain and air leakage. You need them when a room runs hot in the afternoon, when the HVAC works harder than it should, or when old single-pane glass is doing very little. We help you compare glass options and frame materials against your actual exposure, then install units that fit the opening properly. A good window installed with a poor seal is still a leaky window.
Sliding & Patio Doors
Sliding and patio doors are the large openings that connect a living space to a lanai, patio, or yard. They need attention when the track wears, the rollers drag, or the glass has lost its seal and fogged. We install and replace sliders in standard and impact-rated versions, including ES Windows products, and we check the sill and drainage as part of the job. A slider that sticks or leaks is usually a track and threshold problem, not just a glass problem.
Impact Garage Doors and Custom Windows
Impact garage doors and custom or geometric windows round out the category. An impact garage door is often the largest opening on the house, and it needs the same rated assembly as the windows. Custom and geometric windows, from arched units to angled shapes, get measured and templated individually so the frame and glass match the wall. Both are jobs where the details decide whether the finished product looks built-in or bolted-on.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Windows & Doors
We work with ES Windows on sliding and patio door systems, including impact-rated sliders where the opening and the code call for them. ES units are common in Florida homes, and we know how their tracks, rollers, and frames behave over time, which helps us spot wear early and install replacements that line up correctly. We also work with ECO Window Systems on impact-rated windows and doors, matching their product lines to the opening size and exposure of each wall.
On the door side, Therma-Tru entry systems give homeowners a fiberglass or steel option with a finished look, and we hang them with attention to the frame, threshold, and hardware. Mr-Glass is another name we encounter on window and glass work, and we’re comfortable evaluating and replacing those units when they’ve reached the end of their service life. Whether you have one of these brands or any other make, we can help you sort out what’s worth repairing and what’s worth replacing.
Signs You Need Windows & Doors Right Now
- Condensation between the panes. Fog or water sitting inside a sealed unit means the seal has failed and the insulating gas is gone. The glass won’t dry out on its own, and the unit is no longer doing the job it was installed for.
- A door that drags or won’t latch. A door that scrapes the threshold or won’t catch the strike plate is usually telling you the frame has shifted or the hinges have worn. Left alone, the gap lets in air and water and puts stress on the hardware.
- Drafts or hot spots near the frame. If you can feel air moving around a closed window, or a wall near a window runs noticeably warmer, the seal or the frame is failing. That shows up on your cooling bill before it shows up anywhere else.
- Water stains or soft wood around an opening. Staining on the interior trim or a soft spot in the sill means water is getting behind the assembly. This is the one sign worth acting on quickly, because rot spreads into the surrounding wall.
- Sticking sliders or a sagging track. A patio door that takes two hands to move, or a track with a visible dip, is a wear-and-drainage issue. It usually gets worse with each season and can let water pool at the threshold.
Our Windows & Doors Process – Step by Step
- 1
Walkthrough and measurement. We look at each opening, measure the rough opening and the existing frame, and note which units are sound and which have failed. We check for water intrusion around the perimeter, because a new window over rotted framing won’t last.
- 2
Product selection with real options. You choose the brand and the glass package; we handle the build. We lay out the impact-rated, energy-efficient, and standard options side by side, including ES Windows, ECO Window Systems, and Therma-Tru where they fit the opening, so you’re deciding on product rather than being handed one option.
- 3
Written estimate and scope. You get a line-item written estimate before any work starts. It covers the units, the labor, the flashing and sealant, and any framing repair we found during the walkthrough, so the number you approve is the number you see.
- 4
Installation with the opening protected. We set each unit plumb and square, flash and seal the perimeter, and check that the assembly drains the way it should. On larger projects, window and door work is sequenced with the rest of the build so it doesn’t get installed twice.
- 5
Final check and walkthrough. We test every door for swing and latch, every window for operation, and every slider for a smooth track. You get a walkthrough of what was installed and what to watch for, and you know who to call if something isn’t right.
This is the same approach we bring to the rest of the home. If the project runs from the driveway to the kitchen, you’re working with one contractor and one point of accountability across the trades. You can see the full scope of what we handle on the Westchester Construction Co home page.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Windows & Doors Cost in Westchester?
Typical estimated ranges for Westchester depend on whether you’re replacing glass in existing frames or installing a full impact-rated assembly. A typical impact window installation in Westchester runs $8,000 – $25,000 depending on the number of openings, the size of the units, and the framing work needed. A typical window replacement runs $4,500 – $15,000, driven mostly by how many units are going in and whether the frames are sound.
What moves the number: the count and size of openings, glass package and frame material, whether impact-rated assemblies are required, and any rot or framing repair found behind the old unit. Custom and geometric shapes cost more because each unit is templated individually. Sliding and patio doors sit at the higher end per opening because the unit is larger and the threshold detail matters.
How to avoid overpaying: get a line-item estimate that separates units, labor, and repair work, and ask whether flashing and sealant are included. A low bid that leaves out flashing usually costs more later. Our free estimate includes a written scope, and the written estimate sets the final price. Call (888) 334-0815 to schedule yours.
| Project | Typical Estimated Range |
|---|---|
| Impact window installation | $8,000 – $25,000 |
| Window replacement | $4,500 – $15,000 |
Windows & Doors Near Westchester – Our Service Area
We work with homeowners across Westchester and the surrounding communities, including Westwood Lakes, Sweetwater, Tamiami, Kendale Lakes, Doral, Kendall, The Crossings, Kendall West, Three Lakes, Richmond Heights, and The Hammocks. Scheduling depends on the project, and we’ll give you a realistic window when we book the estimate. If you’re weighing a window upgrade against other exterior work, our fence installation page covers how fencing and windows can be sequenced in one exterior project, and our driveway and pavers work rounds out the front of the house.
Serving Westchester, FL – Our Local Coverage Area
We serve Westchester and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Windows & Doors in Westchester
Windows and doors service covers installation, replacement, and repair of window and door assemblies, including impact-rated products, energy-efficient glass packages, sliders, and entry doors. It includes measuring the opening, setting the unit, flashing and sealing the perimeter, and checking operation at the end. We handle everything from a single failed unit to a full-house upgrade as part of a larger renovation. Call (888) 334-0815 to talk through your project.
A single window or door replacement usually takes a few hours to a day, while a full-house impact installation can run several days to a couple of weeks depending on the number of openings. Custom and geometric units take longer because they’re templated and fabricated to order. We give you a realistic timeline in the written estimate so you can plan around it. Call (888) 334-0815 for an exact schedule.
A typical window replacement in Westchester runs $4,500 – $15,000, and a full impact window installation runs $8,000 – $25,000, depending on the number of openings and the framing condition. Glass package, frame material, and any rot repair behind the old unit all affect the number. Our free estimate gives you a line-item written scope, and that written estimate sets the final price. Call (888) 334-0815 for an exact quote; estimates are free.
Yes. We work with ES Windows on sliding and patio door systems, ECO Window Systems on impact-rated windows and doors, and Therma-Tru on entry door systems. We match the product line to the opening and the requirements rather than pushing one brand across every wall. If you have a different brand in mind, we can work with that too. Call (888) 334-0815 to discuss your options.
Same-day service is available depending on the project and the schedule. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday; we’re closed Saturday. A call outside dispatch hours is booked into the next opening. Call (888) 334-0815 and we’ll find the soonest slot that works.
Warranty coverage depends on the product line and the manufacturer, and we walk you through it before you approve the estimate. Impact-rated units from names like ECO Window Systems and ES Windows carry manufacturer coverage that varies by product tier. Installation workmanship is covered under our written scope, which spells out what’s included. Call (888) 334-0815 and we’ll explain the coverage for the specific units you’re considering.
Clear the area around each opening and remove curtains, blinds, and wall hangings before the crew arrives. Move furniture back a few feet so there’s room to work and to set the old units down. If pets are in the house, plan a spot for them away from the work zone. We’ll confirm the details when we schedule, so you know exactly what to expect. Call (888) 334-0815 to book your free estimate.
Schedule Your Windows & Doors Service in Westchester Today
Whether it’s one fogged window, a slider that sticks, or a full-house impact upgrade, we’ll walk the openings with you, lay out real product options, and give you a written line-item estimate before anything starts. Call (888) 334-0815 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. From the driveway to the kitchen, one contractor handles the whole project.
Written by the team at Westchester Construction Co.