Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Westchester Homeowners
Most fence problems in Westchester don’t start at the fence. They start at the property line – a shared boundary nobody has marked, a neighbor’s survey that disagrees with yours, or a row of posts set into soil that’s been shifting since the last wet season. Getting the line right before a single post goes in is the difference between a fence that lasts and one that gets torn out. Our technicians have up to 9 years of experience setting posts, hanging gates, and walking homeowners through setback rules before we dig. We work with a strong local reputation across Westchester and the surrounding neighborhoods, and we quote every job with a written line-item estimate so you know what you’re paying for before we start. Call (888) 334-0815 to schedule your free estimate.
What Our Fence Installation Service Includes
Fencing covers a lot of ground, and the right material depends on what the fence has to do. A boundary marker, a privacy screen, a pool barrier, and a commercial lot divider are four different projects with four different answers. Here’s how we handle each type in Westchester.
Wood Fence Installation
Wood fencing is the most common request we get in Westchester, and it’s usually driven by privacy. A six-foot dog-eared or board-on-board run gives you a solid visual screen and takes stain and paint well, which matters in a climate where sun fades a finish faster than most homeowners expect. We set posts in concrete at depth matched to your soil and the height of the run, then frame and face the panels so the fence stays plumb through the wet season. If you want a specific board profile, pick it at the estimate so we can price the material correctly.

Chain Link Fence Installation
Chain link is the practical answer when the job is boundary or pet containment rather than privacy. It’s the least expensive fencing we install, it holds up to sun and rain with almost no attention, and it works well where a solid fence would block airflow or crowd a narrow side yard. We set galvanized posts, tension the top rail and fabric properly, and fit gates that swing clean instead of sagging after a year. If you need a gate wide enough for a trailer or mower, tell us the clearance at the estimate.

Vinyl Fence Installation
Vinyl fencing gives you a privacy screen without repainting or staining, which is why it’s a steady seller for Westchester homeowners who are done with wood maintenance. The material doesn’t rot, and a quality panel holds its color through Florida’s UV load. Typical vinyl fence installation in Westchester runs $3,500 – $9,000 depending on linear footage, height, and gate count. We set posts in concrete and check that every panel is seated squarely so the fence reads clean from both sides.

Aluminum Fence Installation
Aluminum fencing is the go-to for pool enclosures and decorative front-yard runs where you want a barrier but not a wall. It’s lighter than iron, resists rust, and the powder-coated finish holds up in the sun. Typical aluminum fence installation in Westchester runs $4,000 – $10,000 depending on height, spacing, and how many gates you need. We work with fence installation systems from Ameristar and similar lines, and we’ll walk you through picket spacing options at the estimate.
Iron Fence Installation
Iron fencing delivers the heaviest, most traditional look of the metal options, and it’s what homeowners choose when the fence is part of the front elevation rather than just a boundary. It’s welded or assembled in rigid panels, set on posts that carry real weight, and finished with a coating that needs occasional inspection. We set iron runs with the same care we give any structural work, because a leaning iron fence is hard to correct later. Expect to discuss footing depth and gate weight before we order material.
Fence Repair and Gate Work
Not every fence call is a new install. Fence repair covers leaning posts, storm-damaged panels, sagging gates, and sections a vehicle clipped in the driveway. We diagnose what failed first – footing, hardware, or the panel itself – because repairing the wrong layer just kicks the problem down the road. Fence gates get special attention: hinges, latches, and post anchoring all have to carry the gate’s weight or it will drag within a season. If the existing fence is sound except for a few parts, we’ll say so rather than sell you a full replacement.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Fence Installation
Material choice is yours, and we work with the brands you’ll find on the spec sheet from a real supplier. Bufftech vinyl systems are a common request for privacy runs, and we know how their panel profiles and post systems go together so the install comes out square. Ameristar aluminum and steel fencing comes up often on pool enclosures and decorative runs, and we plan gate weight and picket spacing around their component options. Master Halco chain link and gate hardware covers the practical boundary work, and we fit their fittings and tension bands the way the system is meant to be assembled.
Jerith ornamental aluminum shows up on front-yard and entry fencing where the look matters as much as the barrier, and we set those runs with footing depth matched to the panel weight. Whatever brand you’ve specified, we read the manufacturer’s installation requirements before we dig, because getting the post spacing and footing right is what keeps a warranty intact. Whether you have Bufftech, Ameristar, Master Halco, Jerith, or any other make in mind, we can help – and you choose the brand; we handle the build.
Signs You Need Fence Installation Right Now
- Posts that lean or wobble. A post that moves when you push it has lost its footing, and a leaning section pulls the panels and rails out of line with it. Left alone, one bad post usually takes two neighbors down with it.
- Panels that sag or separate. Gaps between boards or a panel that dips in the middle means the frame or the fasteners have given way. It’s a security gap as much as a looks problem, and small animals and kids find it fast.
- Rust, rot, or crumbling at the base. Wood at the soil line is where rot starts, and metal at the soil line is where rust starts. If the base of the fence is failing, the rest of the fence is on borrowed time no matter how good the top looks.
- A gate that drags or won’t latch. A dragging gate usually means the hinge post has shifted or the hardware has worn. It’s a cheap fix early and a fence replacement later if the post keeps moving.
- You’re adding a pool, a dog, or a new property line. Pool barriers, pet containment, and boundary disputes all create a reason for a fence that didn’t exist before. Get the layout and the permit questions settled before you buy material.
Our Fence Installation Process – Step by Step
- 1
Free on-site estimate and layout. We walk the property line with you, measure the run, note gates and corners, and talk through material options. If there’s a survey or plat, we work from it so the fence lands where it legally belongs.
- 2
Written line-item quote. You get a written estimate that breaks out materials, labor, gates, and any site prep. The written estimate sets the final price, so there are no change orders once the work starts.
- 3
Permits and utility locate. Most cities require a permit for a fence above a certain height, and pool barriers have their own rules – we handle the permit paperwork and call for utility locates before anyone digs. Hitting an irrigation line or a buried cable is avoidable.
- 4
Setting posts and building the run. Posts go in at measured spacing with footings sized to the fence height and material weight. We set string lines, check plumb as we go, and frame the panels and gates square so everything swings and closes the way it should.
- 5
Final walkthrough and cleanup. We walk the finished fence with you, check every gate, and haul away old material and debris. Permitted work gets its inspection scheduled and passed before we call the job done.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Westchester?
Fence installation in Westchester typically runs $3,500 – $9,000 for a vinyl privacy fence, and $4,000 – $10,000 for an aluminum fence, depending on linear footage, height, gate count, and how much site prep the property needs. Those ranges reflect typical estimates, and the written estimate sets your final price.
| Fence type | Typical estimated range |
|---|---|
| Vinyl fence installation | $3,500 – $9,000 |
| Aluminum fence installation | $4,000 – $10,000 |
What pushes a quote toward the top of a range: a long run, extra gates, corners and returns, tree removal along the line, or a hard layer of fill that changes how posts get set. What keeps it near the bottom: a short straight run, fewer gates, and soil that lets posts go in without surprises. The way to avoid overpaying is to get the layout and material choice settled before you sign, and to insist on a written line-item quote rather than a lump sum. Our free estimate includes the walking of the line, the material discussion, and the written breakdown. Call (888) 334-0815 for an exact quote – estimates are free.
Fence Installation Near Westchester – Our Service Area
We install fencing throughout Westchester and the surrounding communities, including Westwood Lakes, Sweetwater, Tamiami, Kendale Lakes, Doral, Kendall, The Crossings, Kendall West, Three Lakes, Richmond Heights, and The Hammocks. Scheduling depends on the run and the material, and we’ll give you a realistic window at the estimate. For a neighboring community, see our fence installation page, or call (888) 334-0815 and we’ll confirm your address against our coverage.
Serving Westchester, FL – Our Local Coverage Area
We serve Westchester and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Westchester
Fence installation is the process of setting posts, framing panels or rails, and hanging gates to create a boundary, privacy screen, or barrier on your property. The work includes layout and measurement, permit handling where required, footing excavation, setting posts in concrete, and fitting gates and hardware. We handle the whole sequence from layout to final walkthrough, including the permit paperwork. Call (888) 334-0815 for a free estimate on your run.
A typical residential fence takes one to three days once material is on site, depending on the length of the run and the number of gates. A short chain link or aluminum run can go faster; a long privacy fence with multiple gates and site prep takes longer. Permits can add time before the work starts, which is why we start the paperwork early. We’ll give you a realistic schedule at the estimate – call (888) 334-0815 to book it.
Vinyl fence installation in Westchester typically runs $3,500 – $9,000, and aluminum fence installation typically runs $4,000 – $10,000, depending on footage, height, gates, and site conditions. Those are typical estimated ranges, and the written estimate sets your final price. We give you a line-item quote so you can see exactly where the money goes. Call (888) 334-0815 for an exact quote – estimates are free.
Yes. We install Ameristar aluminum and steel systems as well as Bufftech vinyl systems, along with Master Halco, Jerith, and other major lines. We follow each manufacturer’s installation requirements for post spacing and footing so the fence performs the way it’s designed to. If you’ve already picked a brand, bring the spec to the estimate and we’ll work from it – you choose the brand; we handle the build. Call (888) 334-0815 to talk through options.
Same-day service is possible for repairs and small installs when the schedule allows, and the best way to find out is to call. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday. Call (888) 334-0815 and we’ll tell you what’s open.
Warranty coverage depends on the material and the manufacturer, and it’s spelled out in your written estimate before you commit. Vinyl and aluminum systems usually carry manufacturer coverage on the material, and our workmanship is backed on the installation itself. Ask at the estimate and we’ll give you the specific terms in writing. Call (888) 334-0815 to get the details for your material choice.
Clear the fence line of furniture, planters, hoses, and anything you don’t want moved, and unlock any gates the crew needs to pass through. If a utility locate is pending, we’ll confirm it’s done before anyone digs. Mark any irrigation heads or invisible dog fencing along the line so nothing gets hit. Call (888) 334-0815 with questions before the day of the install.
Schedule Your Fence Installation Service in Westchester Today
A new fence is a property line, a privacy screen, and a piece of the home’s exterior all at once. We walk the line with you, quote it in writing, pull the permits, and build it to last. Call (888) 334-0815 to schedule your free, no-obligation estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. One contractor, from the driveway to the kitchen.
Written by the team at Westchester Construction Co.